Description
:
🔰 Primer AK-0306 P1÷P5 «NiAcolor®»
📖 Description.
Primer AK-0306 P1÷P5 «NiAcolor®» is a two-component acrylic-polyurethane primer. It is used for priming steel structures made of ferrous and non-ferrous metals, industrial equipment, trucks and passenger cars, railway cars, aircraft and other special equipment, agricultural machinery. This primer can also be applied to plastic products and other non-metallic surfaces.
📋 Product Data Sheet
📝 Product Name:
Primer AK-0306 P1÷P5 «NiAcolor®»
📝 Description:
Two-component primer for protection of metallic and other surfaces.
🧩 Product Components:
Base + hardener
✅ Advantages and key features:
-
🛡️ High corrosion protection
-
🌊 Resistance to salt water and marine atmosphere
-
🌡️ Resistance to extreme temperature fluctuations
-
💪 High hardness and mechanical strength
-
🧲 Excellent adhesion to various metal surfaces and other challenging substrates
-
🛢️ Resistance to water, oils and solvents
-
🎨 Compatibility with various topcoats (polyurethane, acrylic, alkyd…)
-
✨ Good sandability
🏗 Areas of application:
Designed to protect metal structures from corrosion in aggressive environments. Suitable for application on prepared steel and challenging substrates such as aluminum, stainless steel, non-ferrous metals, and plastics.
Recommended for use in:
-
🚂 Railcar manufacturing and railway equipment
-
🚗 Vehicles: passenger and commercial cars, trailers, special equipment
-
⚙️ Metal-cutting machines and industrial equipment
-
🌾 Agricultural machinery: tractors, harvesters, attached equipment
-
🚢 Shipbuilding: ship hulls, decks, tanks, cargo holds
ℹ️ PRODUCT INFORMATION
-
🔧 Type: two-component acrylic-polyurethane primer
-
🎨 Color: not standardized; if required – as agreed with the customer
-
👀 Appearance: smooth, uniform surface, matte or semi-matte
-
📊 Volume solids: ≥ 62 %
-
📏 Typical film thickness: 60–120 μm dry film
-
📐 Theoretical consumption: 7.0 m² at 60 μm dry film thickness
-
🖌️ Application method: brush, roller, air spray, airless spray
-
⚗️ Component B (hardener): Hardener – Harden. 7.2.07-110 «NiAcolor®»
-
⚖️ Mixing ratio: 5:1 (5 kg primer to 1 kg hardener)
-
🌡️ Operating temperature range: from -60 °C to +200 °C (depending on the system)
-
⏳ Pot life: minimum 6 hours
⌛ DRYING INFORMATION
Full drying to degree 3 at:
-
(23 ± 2) °C and 50 ± 5 % relative humidity: no more than 2 hours
-
(60 ± 5) °C: no more than 0.5 hours
-
(120–220) °C: no more than 0.5 hours
🔬 PHYSICO-MECHANICAL PROPERTIES
-
💥 Impact resistance on Ericksen 304 tester, inch, not less than: 21.68
-
🧲 Adhesion, score, not more than: 1
-
💧 Water resistance, not less than, h: 300–400
-
🛢️ Industrial oil resistance, not less than, h: 24
-
💦 Elevated humidity resistance (40 ± 2 °C), not less than, h: 300
📊 Corrosion protection category according to ISO 12944:
-
🌆 C4 — Industrial area and coastal regions with moderate salinity
-
🏭 C5-I — Aggressive industrial atmosphere
-
🌊 C5-M — Marine and coastal areas with high humidity and salinity
♻️ SYSTEMS AND COMPATIBILITY
Compatibility with other coating materials requires additional approval.
🧹 SURFACE PREPARATION
The surface must be clean, dry and degreased.
Abrasive blasting to Sa2½ (ISO 8501-1:2007) or mechanical cleaning to St2 is recommended.
🎨 APPLICATION
Application methods available: airless/air spray, brush, roller.
📦 STORAGE AND PACKAGING
-
🗓 Shelf life: minimum 24 months at 25 °C temperature
-
🏠 Storage conditions: in a cool dry place, away from heat sources and open flame
-
📦 Delivery form/packaging: 25 kg, 20 kg, 3 kg, 1 kg
💣 SAFETY
Use in well-ventilated areas. Avoid contact with skin and eyes.
Observe occupational health and safety standards. Read the safety data sheet before use.
🏗 Typical coating scheme:
-
🎨 Primer: EP-0305 P1÷P5 «NiAcolor®» — 1–2 coats
-
🧱 Intermediate coat (if required): epoxy filler:
-
Filler Fiber-00505 «NiAcolor®» (with fiberglass)
-
Filler PE-00501 «NiAcolor®»
-
-
🎨 Acrylic-polyurethane primer AK-0306 R1 «NiAcolor®»
-
✨ Topcoat: polyurethane, acrylic or alkyd enamel
💡 Ready for real metal protection?
Primer AK-0306 P1÷P5 «NiAcolor®» is not just a primer.
It’s an industrial reliability standard designed to perform where other coatings fail to deliver the same quality.
💥 Industrial machinery, aircraft, vehicles, special equipment, machine tools – primer AK-0306 P1÷P5 «NiAcolor®» performs flawlessly.
✔️ Why choose Primer AK-0306 P1÷P5 «NiAcolor®»:
-
🏆 Highest quality, broad applicability and advanced technology
-
🌡️ Reliability under extreme temperature conditions
-
🌊 Resistance to salt, water, chemicals and loads
-
🚢 Direct application in shipbuilding, mechanical engineering, aerospace, automotive, railcar manufacturing and other industries
📦 Available in industrial packaging
⚙️ Ready for use in any production cycle
📞 Expert support – we’ll help you choose the coating system
👉 Don’t risk your metal — invest in durability.
💪 Order Primer AK-0306 P1÷P5 «NiAcolor®» today and experience the difference.
📦 Available in industrial packaging.
📞 Our experts will help you select the right system for your task.
🛡️ Primer AK-0306 P1÷P5 «NiAcolor®» – corrosion protection and versatility you can rely on. Always.




Reviews
There are no reviews yet.